Friday, June 29, 2012

Scania Bearings

The Scania Bearings can carry combinations of large radial and thrust loads or thrust load only. Because of the difference between the inner and outer raceway contact angles, there is a force component, which drives the tapered rollers against the guide flange. 

The relatively large sliding friction generated at this flange makes this Scania bearing typically unsuitable for high-speed applications without special consideration to coolant / lubricant. Typical applications include construction Scania machinery, gear construction, vehicle manufacture and rolling mills.






Bearings No.Bearings No.Bearings No.Bearings No.
631132208A6303 2RSKHM889449/HM89410
3021732215A6306 2RSNJ306VH.NR
3131132216ABTH 018(NP 07891 )BTH 022
3131232218AJW7049/10NP078914 - 90UA1
3202032306AK39580/K39520T2EE040
3301732308AK482/472T2EE045
3320632308BK497/493T2EE050
332083230AK575/572XT2EE055
3321532311AK582/522T2EE060
142907032312AKH913842/H913810T2EE065
1439070516849/10KHM218248/KHM218210 
1476945538971 , JF 7049 / JF7010 , T2 EE 070KHM220149 / KHM220110VKHB5314
17244826205 2RSKHM88542/KHM88510 

Our parts are not original but perfectly interchangeable with the O.E.M. onces. All original equipment manufacture's name, numbers. Symbols and discription for reference only. 

1 comment:

  1. Hi Guys
    Wonderful post related Renault truck parts. Its contribute to air, noise, and water pollution similarly to automobiles. Trucks may emit lower air pollution emissions than cars per equivalent vehicle mass, although the absolute level per vehicle distance traveled is higher, and diesel particulate matter is especially problematic for healthI got the interior and exterior parts fitting properly. It was very easy to get my truck into the shape I wanted. . Thanks for sharing this information.

    Thanks

    ReplyDelete